Skip to content

Filters

Rain Bird PGA Series Valves

Plastic Industrial Irrigation Valves
Plastic globe/angle valve for residential/light commercial irrigation applications. The PGA Series offers versatility at an affordable price.
Globe and angle configuration for flexibility in design and installation. Rugged PVC construction for reliable operation. Normally closed, forward flow design. Double-filtered pilot flow to resist debris and clogging of solenoid ports. Slow closing to prevent water hammer and subsequent system damage. Manual internal bleed operates the valve without allowing water into the valve box.
Allows pressure regulator to be adjusted without turning the valve on at the controller. One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service. Non-rising flow control handle adjusts water flow as needed.
  • Side-angle photo of the Rain Bird 236239 solenoid repair kit components laid out to display adapter assembly, solenoid handle, plunger/spring and O‑ring for compatibility check.
    Front view of Rain Bird 236239 E‑Z Bleed solenoid assembly showing coil, adapter, plunger, spring and O‑ring ready for valve replacement (close-up). Save 26%
    $69.02
    $50.92
    Rain Bird

    Rain Bird 236239 E-Z Bleed Solenoid Assembly Kit

    In Stock (195)

    The Rain Bird 236239 E‑Z Bleed Solenoid Assembly Kit is a factory-style repair kit engineered to restore reliable operation on Rain Bird PGA, PEB, ...

    View full details
    $69.02
    $50.92
    Save 26%
    In Stock (195)
  • Globe and angle configuration for flexibility in design and installation.
  • Rugged PVC construction for reliable operation.
  • Normally closed, forward flow design.
  • Double-filtered pilot flow to resist debris and clogging of solenoid ports.
  • Slow closing to prevent water hammer and subsequent system damage.
  • Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator to be adjusted without turning the valve on at the controller.
  • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
  • Non-rising flow control handle adjusts water flow as needed.
  • Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
  • Accepts latching solenoid for use with Rain Bird battery-operated controllers.
  • Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1 1/2"); PGA-NP-HAN2 (2").

  • Pressure: 15 to 150 psi (1,0 to 10,4 bar)
  • Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s)
  • Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)
  • Temperature: Up to 110° F (43°C)
  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
    • 0.41 A (9.8 VA) inrush curren
    • 0.28 A (6.7 VA) holding current
  • Solenoid coil resistance: 24 Ohms, nominal

Dimensions

  • 00-PGA: 
    7 1/4" x 5 1/2" x 3 1/4"
    (18,4 cm) x (14,0 cm) x (8,3 cm)
  • 150-PGA: 
    8" x 6 3/4" x 3 1/2"
    (20,3 cm) x (17,2 cm) x (8,9 cm)
  • 200-PGA:
    10" x 7 3/4" x 5" 
    (25,4 cm) x (23,5 cm) x (12,7 cm)

    Note: The PRS-D option adds 2" (5,1 cm) to the valve height

pga series valve pressure loss

PGA series temperature rating 

 

 

Rain Bird Control Valves

Rain Bird DV/DVF Control Valves •Rain Bird JTV/JTVF Control Valves •Rain Bird ASVF Control Valves •Rain Bird PEB-PESB Control Valves •Rain Bird GB Control Valves •Rain Bird EFB Control Valves •Rain Bird Quick Coupling Control Valves

Other Brands of Control Valves

Irritrol Control Valves • Toro Control Valves •Hunter Control Valves