Rain Bird PGA Series Valves

Plastic Industrial Irrigation Valves
Plastic globe/angle valve for residential/light commercial irrigation applications. The PGA Series offers versatility at an affordable price.
Globe and angle configuration for flexibility in design and installation. Rugged PVC construction for reliable operation. Normally closed, forward flow design. Double-filtered pilot flow to resist debris and clogging of solenoid ports. Slow closing to prevent water hammer and subsequent system damage. Manual internal bleed operates the valve without allowing water into the valve box.
Allows pressure regulator to be adjusted without turning the valve on at the controller. One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service. Non-rising flow control handle adjusts water flow as needed.

Sort by

View as

Save 26%

Original Price $140.13

Current Price $103.38

| /

Rain Bird
Rain Bird PRS-Dial Pressure Regulating Module

In Stock (28)

The Rain Bird PRS-Dial pressure regulating module gives you precise outlet pressure control at the valve, minimizing pressure spikes and protecting...
View full details

Original Price $140.13

Current Price $103.38

| /

Save 26%

In Stock (28)

Globe and angle configuration for flexibility in design and installation.
Rugged PVC construction for reliable operation.
Normally closed, forward flow design.
Double-filtered pilot flow to resist debris and clogging of solenoid ports.
Slow closing to prevent water hammer and subsequent system damage.
Manual internal bleed operates the valve without allowing water into the valve box. Allows pressure regulator to be adjusted without turning the valve on at the controller.
One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
Non-rising flow control handle adjusts water flow as needed.
Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
Accepts latching solenoid for use with Rain Bird battery-operated controllers.
Optional purple flow control handle for non-potable water applications PGA-NP-HAN1 (1" and 1 1/2"); PGA-NP-HAN2 (2").

Pressure: 15 to 150 psi (1,0 to 10,4 bar)
Flow without PRS-D option: 2 to 150 GPM (0,5 to 34 m3/h; 0,13 to 9,44 l/s)
Flow with PRS-D option: 5 to 150 GPM (1 to 34 m3/h; 0,32 to 9,44 l/s)
Temperature: Up to 110° F (43°C)
24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
- 0.41 A (9.8 VA) inrush curren
- 0.28 A (6.7 VA) holding current
Solenoid coil resistance: 24 Ohms, nominal

Dimensions

00-PGA:
7 1/4" x 5 1/2" x 3 1/4"
(18,4 cm) x (14,0 cm) x (8,3 cm)
150-PGA:
8" x 6 3/4" x 3 1/2"
(20,3 cm) x (17,2 cm) x (8,9 cm)
200-PGA:
10" x 7 3/4" x 5"
(25,4 cm) x (23,5 cm) x (12,7 cm)

Note: The PRS-D option adds 2" (5,1 cm) to the valve height