Skip to content

Filters

Rain Bird PEB/PESB Series Valves

Plastic Industrial Irrigation Valves
Industrial-strength glass-filled nylon globe valve for commercial irrigation applications. The PEB Series is our most durable plastic irrigation valve. Durable glass-filled nylon construction with nylon-reinforced rubber diaphragm for long life and reliable performance. Globe configuration. Normally closed, forward flow design. Slow closing to prevent water hammer and subsequent system damage. Low flow capability for a wide range of applications. One-piece solenoid design with captured plunger and spring for easy servicing.

    • Durable glass-filled nylon construction with nylon-reinforced rubber diaphragm for long life and reliable performance.
    • Globe configuration.
    • Normally closed, forward flow design.
    • Slow closing to prevent water hammer and subsequent system damage.
    • Low flow capability for a wide range of applications.
    • One-piece solenoid design with captured plunger and spring for easy servicing. Prevents loss of parts during field service.
    • Flow control handle adjusts water flows as needed.
    • Manual internal bleed manually operates the valve without allowing water into the valve box; allows pressure regulator to be adjusted without turning the valve on at the controller first.
    • Manual external bleed permits flushing debris from the system. Recommended for system start up and after repairs.
    • Stainless steel studs molded into the body. Bonnet can be attached and removed more easily and more often without damaging threads.
    • Nylon scrubber scrapes a stainless steel screen to clean and break down grit and plant material. Prevents debris build-up and clogging (PESB Series only).
Specifications
  • Pressure: 20 to 200 psi (1,4 to 13,8 bar)
  • Flow without PRS-D option: 0.25 to 200 GPM 
    (0,06 to 45 m3/h; 0,02 to 12,60 l/s)
  • Flow with PRS-D option: 5 to 200 GPM 
    (1,14 to 45 m3/h; 0,32 to 12,60 l/s)
  • Temperature: Up to 150°F (66°C)
  • 24 VAC 50/60 Hz (cycles per second) solenoid power requirement:
    • 0.41 A (9.8 VA) inrush curren
    • 0.28 A (6.7 VA) holding current
  • Solenoid coil resistance: 24 Ohms, nominal

Options

    • Accommodates optional, field-installed PRS-D pressure regulating module to ensure optimum sprinkler performance.
    • Accepts latching solenoid for use with Rain Bird battery-operated controllers.
    • Optional purple flow control handle for non-potable water applications PEB-NP-HAN1 (1"); PEB-NP-HAN2 (1 1/2" and 2").

Dimensions

    • 100-PEB: 
      6 1/2" x 4" x 4" 
      (16,5 cm) x (10,2 cm) x (10,2 cm)
    • 150-PEB: 
      8" x 6" x 6" 
      (20,3 cm) x (15,2 cm) x (15,2 cm) 
    • 200-PEB: 
      8" x 6" x 6"
      (20,3 cm) x (15,2 cm) x (15,2 cm)

      Note: The PRS-D option adds 2" (5,1 cm) to the valve height.

PEB and PESB series Valve Pressure Loss

PEB and PESB Series Valve Pressure Loss

 

Rain Bird Valves

Rain Bird DV/DVF Series Valves •Rain Bird JTV/JTVF Series Valves •Rain Bird ASVF Series Valves •Rain Bird PGA Series Valves •Rain Bird GB Series Valves •Rain Bird EFB Series Valves •Rain Bird Quick Coupling Valves

Other Brands of Valves

Irritrol Valves • Toro Valves •Hunter Valves

Add a FREE Pair of Gloves to Your Order

Spend $25+ Add a FREE Pair of Gloves to Your Order Select Your Size

Add a FREE Tote Bag

Spend $250 or More, Get a FREE Sprinkler Supply Store Tote Bag

Add FREE Sprinkler Supply Store Hat

Spend $199 or More, Get a FREE Sprinkler Supply Store Classic Blue Trucker Hat