Products

Ball Valve Threaded 1/2" FIPTxFIPT Plastic SCH 80 Series PVC Molded-In-Place Ball Valve. Severe shock loads and misalignment stress are absorbed ...

Hunter - HC-50F-50M - Check Valve: 1/2 in. Female x 1/2 in. Male Compensates for up to 12 ft. of elevation change If you have ever been faced wit...

Hunter - HC50F50F - Check Valve: 1/2 in. Female x 1/2 in. Female Compensates for up to 12 ft. of elevation change If you have ever been faced wit...

½" Air/Vacuum Relief Valve Corrosion-resistant The AVR offers a commercial non-corrosive solution for releasing adequate air flow at the high poi...

Hunter SJ-506 1/2 in. threaded x 6 in. Length Pressure rated to 150 PSI Have you experienced trouble installing sprinklers to the correct finish ...

Standard Swing Joint 1/2 in. threaded x 12 in. 150 PSI Have you experienced trouble installing sprinklers to the correct finish grade because you...

Standard Swing Joint 1/2 in. 3/4 in. threaded x 6 in. 150 PSI Have you experienced trouble installing sprinklers to the correct finish grade beca...

Standard Swing Joint 1/2 in. 3/4 in. threaded x 12 in. 150 PSI Have you experienced trouble installing sprinklers to the correct finish grade bec...

Patent Pending “Push-and-Go” Design - 100% tool and chemical-free approach that cuts installation time in half or more Patent Pending Retaining S...

1/4 Brass Boiler Drain w/ Butterfly Handle Size: 1/2" mip x ght Material: Brass IBDBVNL Series No Lead Brass Boiler Drains. All valves are UPC ra...

Ball Valve Hose Bibbs Size: 1/2" mip x spout Material: Lead Free Brass IHBB NL Series No Lead Brass Boiler Drains. All valves are UPC rated and t...

Easy twist on. Trouble-free installation with double-helix design. Used with swing pipe and other thick-walled 1/2” I.D. tubing. Used in drip irr...

Easy twist on. Trouble-free installation with double-helix design. Used with swing pipe and other thick-walled 1/2” I.D. tubing. Used in drip i...

Poly Riser 1/2 in. x 6 in. Cut-off

Nipple 1/2" x 3/4" MIPT Threaded Both Ends

125 WOG Boiler Drain-Full Flow Stuffing Box Brass Body Hose x 1/2" MIP / 1/2" Solder and 3/4" MIP Hose x 1/2" FIP with Angle Spout Trusted for ov...

Netafim TL075FTEE Combination Tee Ins x Ins s 3/4" FPT FIts all Netafim dripper lines Sold individually.  Bag quantity = 25. 17mm Dripline Fittin...

Maximum operating pressure: 150 psi For discharge of large volumes of air, along mains and at the end of mainlines Place before water meters and ...

Square Head Plug Size: 1/2" Materials: Lead Free Brass No Lead Threaded Bronze Fitting. With dimensions: ANSI B16.15 125S fittings, ANSI B16.24 1...

Nipple Sch 80 1/2" x Close Threaded Both Ends

Nipple Sch 80 1/2" x 2" Threaded Both Ends

Nipple Sch 80 1/2" x 2 1/2" Threaded Both Ends

Nipple Sch 80 1/2" x 3" Threaded Both Ends