XC-200i - 2-station indoor controller
XC-400i - 4-station indoor controller
XC-400 - 4-station outdoor controller
XC-600i - 6-station indoor controller
XC-600 - 6-station outdoor controller
XC-800i - 8-station indoor controller
XC-800 - 8-station outdoor controller
Number of stations: 2, 4, 6, 8
Enclosures: Indoor and outdoor
Independent programs: 3
Start times per program: 4
Max. station run time: 4 hrs
Warranty period: 2 years
Easy Retrieve(TM) Memory
A manual back-up utility that stores complete controller scheduling and setup information in back-up memory. This allows the saved watering schedule to be restored at any time. This can be used to set a controller back to its initial settings after tampering or at the beginning of a new season.
PROGRAMMABLE RAIN DELAY
The Programmable Rain Delay feature incorporates a user specified number of days to keep the controller in the OFF mode, then allows for the system to automatically revert back to scheduled irrigation. This will prevent watering during an extended period of inclement weather, but will resume watering automatically without requiring a return visit to the controller. The controller displays the number of days remaining before watering resumes.
The Quick Check feature makes a quick diagnosis of field wiring issues easy to assess with the push of a button. Quick Check displays an ERR message when a field wiring short is detected on a particular station number.
This feature offers protection against unreliable power, retaining current time, date, and program data.
AUTOMATIC SHORT CIRCUIT PROTECTION
Automatic short circuit protection is a feature found in all Hunter AC powered controllers. This feature automatically detects electrical faults, which are typically caused by wiring issues. Stations that have shorts detected are skipped, allowing watering to continue for those stations where faults are not detected. There are no fuses to blow or internal circuit breakers to trip that can result in completely disabling irrigation.
SEASONAL ADJUSTMENT: GLOBAL OR AUTOMATIC UPDATES WITH SOLAR SYNC
This feature allows for quick adjustments to irrigation run times through a percentage scale. During peak season, set the seasonal adjustment to 100%. If weather conditions require less water, enter the appropriate percentage value (i.e. 50%) to cut down irrigation run times without the need to adjust each station in the program. This model offers two different ways to use Seasonal Adjustment to reduce water usage: Global and Daily.
Global: The Global option provides a Seasonal Adjustment percentage to all station Run Times on all of the controller's Programs.
Daily: With the addition of a Solar Sync ET Sensor, the controller has the ability to automatically implement daily adjustments based on measured local weather.
DELAY BETWEEN STATIONS
A delay in watering between individual stations as the controller moves from one to the next. The delay may range from a few seconds, to permit slow-closing valves time to shut down, or much longer to allow pressure tanks, etc., to refill or recharge.
The ability to specify which program or stations will be shut down in response to a specific sensor alarm. This allows stations or programs unaffected by the sensor to continue automatic operations.
Hunter XC Hybrid Controllers •
Hunter SRC Controllers •
Hunter PRO-C Controllers •
Hunter PRO-C Conventional Controllers •
Hunter ICC Controllers •
Hunter I-Core Controllers •
Hunter ACC Controllers
Other Brands of Controllers
Irritrol Controllers •
Toro Controllers •
Rain Bird Controllers